System Ancillaries

Alarm Buttons • Reset Panels • Conduit Cabling Adapter Plates • Installation Aids

This wide range of ancillaries gives the Cronapress system great flexibility in terms of meeting customers' locations, wiring preferences and performance requirements. The list is by no means exhaustive and bespoke ancillaries are commonplace.

Alarm Buttons

Alarm Button Boxes

Alarm button boxes can be surface mounted for conduit cabling or recessed for chased wiring. All come complete with back box and fixings.

Reset Panels

Like the alarm button boxes, reset panel boxes can be surface mounted for conduit cabling or recessed for chased wiring. All come complete with back box and fixings.

Actuation methods and LED indicator lights can be combined to suit demands. Actuation can be by push button, which come in different designs, by key or by magnetic probe.

Conduit Adapters

Conduit adapters can be supplied in rugged stainless steel or plastic, the latter having the ability to be installed around internal or external corners as well as flat.

All can configure the 20/25mm take-off in either vertical direction or horizontal in the case of the single design.

For surface trunking where the industrial look of conventional conduit is not acceptable, surface wiring can use the decorative conduit shown for a neat appearance, using the bespoke connector to a low-profile box.

All adapters are supplied with wired insert strip terminals and with fixing and assembly screws, where appropriate.

Installation Aids

Insert strip fixing kit (see opposite)

Drilling jig
Twist drill
Torque driver
Screws

The drilling jig locates in the countersunk holes in the aluminium track and the twist drill is the correct size to drill through the insert strip flange without endangering the threaded fixing holes in the track.

Fitting kit useful for Alarm Strip to wall installation.

Cloth Tool Bag containing the following:–

Multi Meter. - Aneng SZ308 Square Wave Digital Tester. Supplied with AAA size batteries and additional ‘crocodile clip’ leads.
Hacksaw - Professional Grade hacksaw. Supplied with spare 24T blade.
Spirit Level. - Magnetic Torpedo Level 300mm
Tape Measure – 7.5mtr
Small Flat Blade Screwdriver – Electrician type Insulated Handle.
All Purpose Shears. Cutting Insert.
Screwdriver - Torx T20 – Security Pin. (End caps)
Screwdriver - Torx T10 – Security Pin. (Switch plates)
Marxman Marker Tool. Accurately marking drill holes.
Alignment Stepped Pins. – Pack 100s

Wiring Kit useful for Alarm Strip to Alarm System installation.

Closed End Crimp Cap CE-1X – Pack 100
Closed End Cap Crimping Tool
Ferrule Sleeves Terminal Crimping Tool and box of assorted Terminals
Additional Ferrule Terminals E0508 White Pack 1000 (Suitable Cat5e)
Universal Network Cable Outer Sleeve Stripping Tool Suitable Cat 5e Cat6, Cat7, Cat8.
Data Cable (Cat5e or similar) Inner wire stripping tool.
Gel Crimps K2 Pack 100
Gel Crimps K1 K2 K3 Crimping Pliers.

For pictorial guides to help with installation, go to www.cronapress.co.uk/support/pictorials